WET DRUM MAGNETIC SEPARATORS

Separate magnetic, fine-grained particles in a wet medium – using STEINERT wet drum magnetic separators

Powerful in deployment: wet operating magnetic drum and matrix separators

Our STEINERT wet drum magnetic separators are used in the fine grain range from 1 µm up to 3000 µm (0.001 mm – 3 mm) to separate magnetic particles from process liquids, sludges or emulsions. Their strong magnetic fields enable the efficient separation of magnetite or ferrosilicon from the wet medium. Either a combination of the STEINERT HGF matrix separator and STEINERT NTS wet drum magnetic separator or with extreme throughputs the large STEINERT WDS drum separator can be used depending on the grain size, the levels of ferromagnetic particles and the required throughput.

The applications range from processing heavy solutions from flotation or sink/float separation, iron ore beneficiation through to the cleaning of process water from degreasing baths or coolants. The processing objective here can be both the recovery of valuable iron particles and the avoidance of disruptive iron particles, e.g. upstream of membrane or ultra-filtration.

  • Wet magnetic separation
  • Fine grain range from 1 µm to 3000 µm
  • STEINERT HGF high gradient filter
  • STEINERT WDS and STEINERT NTS wet drum magnetic separators

Find your contact partner



SERVICES

THE PERFECT SOLUTION FOR YOUR REQUIREMENT

STEINERT NTS

For capturing magnetic particles in process waters from degreasing baths

Product link

STEINERT WDS

For recovering magnetite and ferrosilicon from heavy solutions or iron ore at grain sizes between 1 µm and 3 mm

Product link

STEINERT HGF

For removing the finest magnetic particles, usually less than 10 µm, from liquids and emulsions

Product link