STEINERT MAGX M
STEINERT MAGX M manual-cleaning suspension magnet is ideal for tramp iron removal
The STEINERT MAGX M overhead suspension magnets are designed to remove unwanted tramp metal, efficiently and effectively under extreme environmental conditions
The worldwide processing of ores and coal requires the effective removal of tramp iron at very high throughputs. Electromagnets from STEINERT are characterised by their extremely strong and extensive magnetic fields. The pronounced depth effectiveness of these electromagnets means that tramp iron can be reliably collected even from deep layer thicknesses. They provide protection to the crushing and comminution circuit, limiting wear and damage of this critical circuit.
These magnets have proven themselves for decades even at high belt speeds and large belt widths. Here the special design of the STEINERT MAGX M, with coils made of anodised ANOFOL® aluminium strip and an oil filling, provides consistent and efficient cooling – and even the risk of a burnt coil is significantly reduced. The coil design also results in a maximum number of windings with a simultaneously compact design. An external expansion vessel is not required for the cooling liquid. Passive cooling may be sufficient for smaller sizes as needed, whilst we equip large series with a heat exchanger as active cooling.
Electromagnetic overhead suspension magnets from STEINERT can also optionally be operated with metal detectors, so that the magnets are only switched on when required and power can also be increased using excessive excitation. Or you rely on the "permanent retention" system: here permanent magnets are installed in addition to the electromagnets ensuring that tramp iron already excavated does not return to the sortable material, for instance in the event of a power failure. Stationary STEINERT MAGX M units are available with working widths up to 2,720 mm.
The STEINERT MAGX M provides:
- Higher Strength
- Lower Weight
- Higher Power (when required)
- Each size available in a range of power levels to suit a variety of tramp removal duties
- Several oil cooling options available that provide increased energy efficiency
- Permanent Retention option allows for placement over chutes or crushers to protect equipment in event of power outage.
Downloads
Fact Sheet STEINERT MAGX M
Download after data entry
